Teeth Jewellery - Know More About It!

We all desire and do many things to get a bright, white smile. So, how about adding a small tinkle that would flash every time you smile? Teeth jewellery is gaining popularity and includes placing diamonds or gems on the teeth. The idea of flashing a red ruby or a blue sapphire only adds to the joy that is revealed through the smile.

Tooth gems are colourful crystal glasses mounted on a thin aluminium foil which can be used on the teeth. Unlike body tattoos and piercings, there is no invasive procedure involved in dental jewellery placement and is therefore much safer. There is no drilling required, no pain, and hardly any extra maintenance after their placement. These gems or crystals can be placed even for special occasions and removed later.

Here is how it is applied: Once the patient has agreed to go for a tooth jewellery, given them various options to finally arrive at the colour, size, and shape of the jewellery. The following is a step-by-step approach for placing it on the tooth.

1. The tooth is completely dried, isolated, and cleaned with a polishing paste
2. Tooth is etched with 37% orthophosphoric acid for about 30 seconds. This will improve the bonding of the jewellery to the tooth structure
3. The etchant is then rinsed off with water and the tooth is again dried for about 10 seconds
4. A light-curing bonding agent is applied on the tooth, left in place for about 20 seconds, light-cured, rinsed off and dried again
5. Place a small amount of flow composite on the tooth surface
6. Using a small forceps, pick up the jewel to be placed on the tooth without touching with fingers. Avoid skin contact especially on the back of the jewel. Position it in the desired way and apply gentle pressure
7. The jewel should be in close contact with the enamel, pushing out the excess composite material from the tooth structure
8. While still in the dental chair, show it to the patient on a mirror and make minor adjustments if required
9. Once the final position is achieved, cure the composite thoroughly for about 60 seconds. Cure it from all side including the back of the tooth.
10. It takes about 4 minutes for the entire placement easy, is it not?

Complications:

1. Lost jewellery due to aspiration
2. Chronic irritation to the adjacent mucosa (especially lips or tongue)
3. Tooth fracture due to the weakened natural tooth structure, especially if the chosen jewellery size is slightly bigger
4. Tooth jewellery is for any person who wants to add a sparkle to their smile, of a colour of choice. It is advantageous in being temporary, painless, and of course, brightening and dazzling the smile.